Tensile Test | Tensile Testing Machine – Imada Seisakusho

Controller

50N

500N

20kN wedge type

Air grip

It is produced in accordance with each load specifications

Wire winding jig

This device is a metal wire tensioning fixture capable of handling loads of up to 50kN. It operates by wrapping the wire around the drum.

Wine bottle corkscrew jig

The purpose of the fixture is to gauge the force required to open a bottle of wine.

Welding strength tension jig

Grip and pull the welded section onto the sheet metal.

Resin parts tension jig

This fixture securely holds and extracts resin components.

Special film chuck

This is used for testing beyond 500N load or for sample width of over 50mm.

Special flat chuck

Special flat chuck designed for high load.

Optical fiber attachment

This chuck is specially designed for pulling test of optical fiber. The diameter of the drums is made big in comparison with that of the standard wire winding grip. (on the photo, φ50mm)

Woven and knitted fabrics test attachment

In accordance with the ‘JIS L 1096 Testing method for woven and knitted fabrics’.

Tape tensile test attachment

IThis jig is to hook wires in ring-shape.

The examination that was put in a liquid

It is a jig performing a pulling examination in a liquid. Here show has a structure that after fixing a sample both from the top and the bottom, the vessel with liquid in it is to be lifted up and the sample is to get into the liquid.

Attachment for lead-free solder

In accordance with ‘JIS Z 3198-6’.

Attachment for wire ring

リング形状のワイヤーを引掛けての引張試験用治具。

Die casting pulling attachment

This jig is designed according to the specific shape of a sample, enabling its pulling test.

ワイン栓抜き治具

The (objective) jig measures force to uncork the wine.

×