Bending Test

Bending jig with stopper

This fixture, equipped with a stopper, facilitates centering the workpiece.

Tile bending jig

The specialized fixture for conducting three-point bending tests, particularly for tiles. It will be manufactured to comply with each respective standard.

Double swing bending jig

This bending fixture simplifies the process of centre adjustment.

Printed circuit board bending jig

This jig is for bending tests of the boards. The upper jig which presses the testing sample has R=230mm. The photo shows a sort of support by this a sample does not move even during a repeat test

4-point bending test jig

Four-points bending jigs in accordance with a standard such as ‘JIS R 1601’, or other user’s standards can be produced. There is a fixed type for each span as well as adjust table type.

Clamp-type bending jig

This jig is aimed to grip the testing sample and then to bend, which is a different from ordinary bending test.

Large size special bending jig

It is a jig for bending strength examinations of building materials and long size pieces.