Cedar Torque Tester DI-11

cedar_torque_tester_di-11

Moment (torque) inspection of various parts The performance management of a high torque electric driver

Yes-no decision conditions etc. can save five channels.
.. A channel is only changed even if bolting conditions change. It is not necessary to reset up a maximum value and a minimum value one by one like former.

Feature:
Everyday check of an electric driver can be performed.
Since various information is displayed on a display board, it is very intelligible.
The change of a measurement unit can be performed.
Memory data is 800 affairs.
Real-time output Every about 1 / 180 seconds
The taking-in software of data can download from a homepage.

Torque Tester　DI-11

Specifications:

SpecificationDI-11
Measuring range  
(at the time of Track)		0.10～20 N･m
　1.0～200 kgf・cm
1.0～174 lbf・in
Accuracy±0.5％(499 or less digit±3digit)
DisplayThe 4 figures digital display of LED
The measurement directionCW-CCW (right and left)
Measuring
mode		P-P  PeakPeak load value hold
T-R  TrackIndication of real time torque value.
P-D  Peak downHolding Load Value at the moment to change from upward to downword
C(Real-time Output)Load torque value is outputted every about 1/ 180 second.
clearanceIt is a display clearance in set-up time.   (0.1 – 3.0 sec)
Data outputASCII Format (baud rate 19200)
Auto power save10 minutes no use, automatically switch off.
Charging timeFrom empty – less than 6hours
Continunous working time12 hours
WeightAbout 1.5kg
Outside dimension130（W）×180（D）×34（H）
AttachmentMeasurement joint 　SJ-50 / SJ-100 

Accessories
(one piece each)

AC/DC adaptor (Please choose AC adaptor out of 120V, and 230V.)
Exclusive receipt case
An inspection report, a proofreading certificate,
traceability system figure