Yes-no decision conditions etc. can save five channels. .. A channel is only changed even if bolting conditions change. It is not necessary to reset up a maximum value and a minimum value one by one like former.

Detection part is very a compact! The best for measurement of an automatic line OW join. it rewinds at and is needlessness.

Disply screen became large. It is very legible .It became large 1.5times. Various attachments are attached. Measurement is possible,with a bit attached.

-Yes-no decision 
-Average calculation
-Data storage is 800 affairs.
-Data output at real time (every about 1/180 seconds). 
-USB terminal data output


pecification DIS-IPS20C DIS-IPS5C
Measuring range >0.20~20 N・m
  2.0~200 kgf・cm  
2.0~174 lbf・in
0.020~5 N・m
0.20~50 kgf・cm
0.20~45 lbf・in
Accuracy ±0.5%   (499 or less digit±3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (right and left)
P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword.
C Real-time output Load torque value is outputted every about1/ 180 second .
Setting of torque value A maximum and a minimum value are in a measuring range, and a setup is possible.
Can confirm the set value by the buzzer sound or LED.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch-Zero Clearance Easy Zero-Adjustment with pressing CLEAR button
The Maximum, the minimum, and the average value The maximum, the minimum value, and average value of the saved data
Data spec. Data transfer ASCII format (Baud rate : 19200)
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time From empty - about 3hours
Continunous working time 12 hours
Attachment fit mouth 20mm 
Meter outside type dimension 100(W)×105(D)×40(H)
Weight Meter part    520g
Attachment Fixed>   Attachment 
20㎜ M4/M5/M6/M8
cube 20*20*20
OW joint OW-20 OW joint OW-10
 (one piece each)
AC/DC adaptor (Please choose AC adaptor out of 120V, and 230V.)
An inspection report, a proofreading certificate, a traceability system figure
WhatsApp chat