Digital torque drivers are tools used to apply a specific torque to a fastener, such as a bolt or nut, with precision and accuracy. They are equipped with a digital display that shows the applied torque, making it easy to monitor and control the tightening process. Digital torque drivers may be used for manual tightening or as part of an automated tightening system. They are often used in applications where the correct torque is critical, such as in automotive assembly, aerospace, and electronic manufacturing.
The NDID-150CN is a digital torque driver designed for tightening and final inspection of screws and bolts. It is an idling type torque driver that counts the quantity of torque and number of tightened screws by producing a clicking noise during the tightening process.
The DID-4 is a digital torque driver designed for tightening and final checks of screws and bolts. Its lightweight and compact design features an integrated display for improved operability, and it is cordless for increased mobility.
This torque tool is designed for the tightening and final check of screws and bolts, especially for small screws ranging from M0.8 to M2.0. It is also suitable for checking the starting torque of rotating bodies such as volume and hinge.
Yes-no decision conditions etc. can save five channels. .. A channel is only changed even if bolting conditions change. It is not necessary to reset up a maximum value and a minimum value one by one like former.
Features:
*The torque screwdriver is Ergonomic and light weight, yet ruggedly constructed *Available in: lb-in, kg-cm and N-m (mN-m） *Peak, Real Time and Peak Down measuring mode (selectable) *800 data memory. *Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing *Programmable screw tightening counter *Programmable Auto Zero function resets unit to zero for easy operation *Both CW and CCW operation *ASCII format output(USB) *Runs on internal Ni-MH batteries (for 12 hours) Auto shut-off after 10 min. of non-use * AC charger and carrying case included.
Yes-no decision conditions etc. can save five channels. .. A channel is only changed even if bolting conditions change. It is not necessary to reset up a maximum value and a minimum value one by one like former.
Features:
*The torque screwdriver is Ergonomic and light weight, yet ruggedly constructed
*Available in: lb-in, kg-cm and N-m
*Peak, Real Time and Peak Down measuring mode (selectable)
*800 data memory.
*Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing
*Programmable screw tightening counter
*Programmable Auto Zero function resets unit to zero for easy operation
*Both CW and CCW operation
*ASCII format output(USB)
*Runs on internal Ni-MH batteries (for 12 hours) Auto shut-off after 10 min. of non-use
* AC charger and carrying case included.
Yes-no decision conditions etc. can save five channels. .. A channel is only changed even if bolting conditions change. It is not necessary to reset up a maximum value and a minimum value one by one like former.
Features:
The main functions (DIS series)
-Yes-no decision
-Average calculation
-Data storage is 800 affairs.
-A convenient functional setup of a setup of a measurement start value etc.
-Data output at real time (every about 1/180 seconds).
-USB terminal data output